Remote for Liftmaster 971LM

Garage door remote control for Liftmaster 971LM

Product Specifications

Compatible with RED/ORANGE Learn button 970LM, 971LM, 972LM, 973LM, 974LM, 91LM, 92LM, 94LM, 96LM, 950CB, 953CB, 956CB, 139.53680, 139.53681

Programming instruction

Program to Gate / Garage Door Openers the same way as original remotes, please refer to your receiver's user manual.

For a typical receiver, the programming procedure is as follows:
1. Press and hold the remote control push button.
2. Press and release the Learn button in the Control Center on the opener panel. The indicator light will flash once.
3. Release the remote push button. Now the opener will operate when the remote control push button is pressed.
Note: If you release the remote control push button before the indicator lights flash, the opener will not accept the code. To erase all codes from the receiver, hold the receiver's Learn button until the indicator light goes off (after 6 seconds). All codes that the receiver has learned will be erased.